The Online Magazine "Ideas For Your Home" You Find Ideas And Original Solutions, Project Planning And Design Of Your Home Interior

How To Pass Race Mass: Complete Step-By-Step

The running mass is an essential product for works and reforms and its function is to correct imperfections of the surface of walls and ceilings. It should be applied after plastering (cement, lime and sand) and leaves the walls smooth and ready to receive paint. In this article, you will discover how to pass dough race correctly:

This product levels the interior surfaces by removing bubbles, latches, unevenness and other imperfections. Also known as PVA dough, made from vinyl resin, it is a creamy material and ideal to be applied on concrete and masonry. It has excellent filling power, is easy to apply and dries very fast.

The running mass or PVA mass is not resistant to humidity, so it should only be applied in internal rooms and that do not receive excess water like rooms, rooms and dry spaces. And the most suitable surfaces for its application, besides plaster and concrete are fiber cement, plaster, walls already painted with acrylic paint or PVA latex.

If your intention is to level or renovate walls in the outdoor area or in bathrooms and kitchens you should use acrylic mass.

The application of mass racing is simple and practical, so if you have ease with manual activities you can do it on your own without the need to hire a professional. Want to know how? Then follow our article.

How to Pass Race Mass: Necessary Materials

How to pass race mass: complete step-by-step: complete

The materials required for the application of run-on mass on the walls can be found at any building materials store:

  • Steel spatula;
  • Steel forklift;
  • Specific running mass for the environment (internal or external);
  • Sandpapers;
  • Sealer;
  • Paint roller;
  • Safety materials: gloves, cap, goggles, goggles and closed clothing.

How to pass dough race: step-by-step

How to pass dough step by step

1. Prepare the wall

  • Clean the walls well, they should be free of dirt, mold, dust, stains, grease, loose particles, old paintings;
  • If necessary clean the walls with water and neutral detergent and if there are mildew points, apply a mixture of water and chlorine;
  • Expect to dry well, do not rush to apply the dough or the result will not be what you want;
  • Sand the walls with thick sandpaper (nr 180) and wipe again to remove dust by wiping with a broom or soft cloth as the impurities hinder the adhesion of the dough to the wall.

2. Apply the sealant

  • Apply the sealing emulsion with a paint roller;
  • It is only necessary to apply the sealer if the wall is already painted or if there is direct contact with the humidity;
  • Wait for the drying time to vary from 1 to 4 hours.

3. Prepare the dough

  • Observe the manufacturer's guidelines, but in general, the running masses available on the market are already ready for use;
  • If it is very hard, dilute the dough with water in the proportion of 5 to 10% of the volume, beat very well so that it is homogeneous and use in up to 24 hours at most.

4. Apply the dough

  • Always start the application from the corner of the wall towards the center and preferably from the bottom to the top;
  • Use the spatula to remove an adequate amount of dough from inside the package and place it on the trowel that will be used to apply the product against the wall;
  • The spatula feeds the larger side of the trowel with the dough while you stretch the dough on the wall always with an eye so that it is thin and uniform;
  • Apply thin layers and in small spaces so that in about 2 minutes you can use the trowel to remove excess mass;
  • For a better result, apply two coats of dough, the first one will correct the main imperfections and the second will finish leaving the wall very smooth;
  • Let it dry for at least 24 hours between one coat and another and after applying the second coat, your wall will be ready for painting after about 3 hours.

5. Finalization

  • Sand the walls again, this time using fine sandpaper, just to ensure a uniform result;
  • Your wall is ready to receive the painting and renew the environment.

How to pass the dough on the ceiling

How to pass dough on the ceiling

The process of applying the running mass to the ceiling is the same as that of the wall, including cleaning and surface preparation. The difference is that it will be more tiring since this area does not favor much the life of who will do the service.

When applying the dough on the ceiling you need to protect your eyes and head well to prevent dirt, dust or grease from falling onto your face.

In addition, you will also need ladders and scaffolding to stay in a good position and avoid wasting material.

Tips for letting the perfect finish

  1. Use a thick sandpaper and a broom to leave the surface smooth and clean before applying the sealer and running dough;
  2. Pass at least two coats of the dough and use a squeegee to remove excess product;
  3. Thread a fine sandpaper on the wall at the end of the application after waiting for the drying time;
  4. Always observe the drying time so that the dough is well adhered to the wall;
  5. Use a light bulb to find small defects that may appear after sanding and make the necessary corrections.

Why apply dough?

How to pass race mass: complete step-by-step: mass

  • With the running mass, the internal finish and the effect of the walls is much more beautiful;
  • In the rooms, the clean walls bring harmony to the residents;
  • Passing dough on the walls helps seal the structure and protect it for longer;
  • If there are cutouts on the walls, the finish gets much better with the dough run;
  • The running dough also helps to save paint.

Making textures with running dough

How to pass race mass: complete step-by-step: mass

You can also renew the ambience of your home by applying a texture to a wall of the room, leaving the place charming and sophisticated. And do not think it's difficult to apply this technique, just choose the style that suits you the most and use a roll of foam for texture in addition to the materials already listed in the article.

Follow the same guidelines with regard to cleaning and preparation of the wall that will receive the texture, apply the running dough and with the foam roll for texture, make the effect on the wall by passing it directly onto the still damp mass,

Repeat the process to complete the entire wall and finish the finish with gel or acrylic paint, if necessary.

A wall with running dough has a much more beautiful visual aspect and a perfect finish, which makes all the difference to the day to day life of the house. Try to purchase good quality products to prevent cracks and imperfections from occurring over time.

Now that you know how to apply dough and what you can do yourself without the help of a professional, put your hand in the dough and renew your environments.

How To Pass Race Mass: Complete Step-By-Step

FAQ - 💬

❓ What are the basic steps of sprint race?

👉 Technique training for sprinting can be divided into five areas: starting, acceleration, drive phase, recovery phase, and deceleration.

  • Starting. Athletes start from a variety of positions, including stationary or moving. ...
  • Acceleration. ...
  • Drive and Recovery Phases. ...
  • Deceleration.

❓ How do you do 100m?

👉 To start the 100m: Your back leg, which starts off extended, will take the first quick step and come forward. Your front leg will then quickly move forward and propel you forward. Your hips will extend and catapult you upward and ahead.

❓ How can I run 100m faster?

👉 How To Run A Faster 100m: The Complete Sprinters Guide

  1. Warm-up. The goal during your warm-up is to facilitate faster muscle contractions and help prepare you for your training. ...
  2. Interval Training. ...
  3. Strength Training. ...
  4. Pre-race Preparation. ...
  5. Warm-up. ...
  6. Setting up the starting blocks. ...
  7. Pre-Race Routine. ...
  8. On Your Marks.

❓ Is 12 seconds good for 100m?

👉 11 seconds for the 100m is considered fast, as many athletes who train regularly will aim for this barrier to beat. Many fail, some succeed, but you can call yourself an excellent sprinter if you're running under 11 seconds for the 100m.

👉 Overview of the M&A Process. 1 10-Step M&A Process. If you work in either investment banking Investment Banking Investment banking is the division of a bank or financial institution ... 2 Structuring an M&A Deal. 3 Rival bidders in M&A. 4 Strategic vs Financial Buyers in M&A. 5 Analyzing Mergers and Acquisitions. More items

❓ How do I make a payment through masstaxconnect?

👉 If you are not registered for MassTaxConnect but need to make a payment: Enter your SSN or ITIN and phone number (in case we need to contact you about this payment) Choose the type of tax payment you want to make and select "Next". Choose the amount you want to pay and your payment method and select "Next". Review your payment and select "Submit".

❓ What is the M&A process in corporate finance?

👉 We discuss this in more detail in the M&A section of our Corporate Finance course. One of the biggest steps in the M&A process is analyzing and valuing acquisition targets. This usually involves two steps: valuing the target on a standalone basis and valuing the potential synergies of the deal.

❓ What is the race strategy?

👉 It is a real skill to be able to sum up your work in a concise way. Using RACE Is an innovative way of helping your struggling and even advanced students to deliver on the following: ● Answer passage-based, short response questions in a formal style. When Can You Use the RACE Strategy?

Video Editorial: How to Trail Brake: A Step-by-Step Guide


Menu