The Online Magazine "Ideas For Your Home" You Find Ideas And Original Solutions, Project Planning And Design Of Your Home Interior

Tools: Types Of Extenders

Tools: Types of Extenders

The main function of the trowel is to level the wall by spreading the mass evenly and in a straight line.

Also known as demolisher or demister, the demolisher handles materials such as mortar and concrete. It is made in the form of steel plate with a hilt in the center.

There are also plastic versions.

In addition to leveling a surface, it corrects any excess mass that has escaped the line given to this wall. It is also used for grouting.

Toothed models allow to spread the material creating grooves - ideal for the good fixation of coatings like tiles, ceramics and stones.

Other models are ideal for create effects on walls.

Know below the main types of trowels and their uses.

Flat and Super Slippers

trowelers-smooth-super-smooth

Difference between smooth and superlisa

The flat slab is the most basic, suitable for mass preparation, surface coatings with coarse or fine dough and regular flat finishes.

Works materials such as mass, mortar and monolayer. It has a specific subtype for plaster and for application of grout.

Its base is alveolar, similar to a hive. This facilitates the removal of any particles.

The superlice studs have a completely flat base, without reliefs. They are destined for preparation, coatings and finishes even more elaborated with thin mass or monolayers.

Both flat and super smooth layers have plastic versions.

Toothed and Superdentated

Toothed planers have a wider toothed side. The superdentates have both the lateral and the toothed width. The traditional toothed teeth have a square toothed shape and are used to prepare the material.

The super teeth, with 6 x 6 x 6 mm teeth, are specific to porcelain and glass inserts, including ceramics smaller than 20x20cm in internal area.

The superdentadas 8 x 8 x 8 mm are used for the laying of coatings (ceramics, stones) on floors and walls.

overdriven

Overdrive Planer

When these pieces have large shapes, it is recommended to the 10mm radius cutter. This eliminates the use of double layer (adhesive mortar on the back of the plate and base).

The U-shaped superdent is specifically designed for laying porcelain and stoneware. Also, it does not require the use of double layer of adhesive paste on the back and base of the plate.

superdentated-in-u

U-shaped superdrill

Toothed and superdentated planers have plastic versions.

Foam or Rubber Plungers

Foam slicers level masses, mortars and monolayers and perform fine-mass finishing. Its base is lined with polyurethane foam 2 cm thick and density that allows it to be resilient and flexible at the same time.

The rubberized trowel is ideal for smoother finish on plaster, replacing the use of the sponge.

They can also be used for the application of grouting; facilitating the removal of excess grout on the coatings.

Round Edge Scrapers

The round edge grader has an elliptical rather than a rectangular shape. It is indicated for surface application of cement when firing cemented floors.

trowel-rim-round

Round Edge Forming Machine

It also smoothes concreting by deposition or projection, since it facilitates the contour of pillars and tubes.

The curved shape allows you to move back and forth on the concrete surface, avoiding marks and scratches.

Tools: Types Of Extenders

FAQ - 💬

👉 Extenders, also often called teleconverters, are optical accessories that attach to the rear end of a lens to increase the focal length.

👉 The two most common varieties are 1.4x and 2x extenders, though Nikon also makes a 1.7x version as well. As you’ve probably guessed, the number represents the factor by which the focal length gets multiplied.

👉 17 Must-Have Tools and Extensions for streamers with instructions. 1 1. Stream Legends. Stream Legends is an RPG extension for Twitch that lets communities quest and build guilds together. For a streamer it helps you ... 2 2. Amazon Blacksmith. 3 3. Stream Aid. 4 4. Streamlabs. 5 5. Exclusive Content for Subscribers. More items

👉 What Are Extenders? Extenders, also often called teleconverters, are optical accessories that attach to the rear end of a lens to increase the focal length. The two most common varieties are 1.4x and 2x extenders, though Nikon also makes a 1.7x version as well.

Video Editorial: Monster Tools Wrench Extender. What is it? What does it do? How does it help?


Menu